- variableThe name of the variable that this constraint is applied to.
C++ Type:NonlinearVariableName
Description:The name of the variable that this constraint is applied to.
- slaveThe boundary ID associated with the slave side
C++ Type:BoundaryName
Description:The boundary ID associated with the slave side
- master_variableThe variable on the master side of the domain
C++ Type:std::vector
Description:The variable on the master side of the domain
- masterThe boundary ID associated with the master side
C++ Type:BoundaryName
Description:The boundary ID associated with the master side
TiedValueConstraint
under construction:Undocumented Class
The TiedValueConstraint has not been documented, if you would like to contribute to MOOSE by writing documentation, please see Documenting MOOSE. The content contained on this page explains the typical documentation associated with a MooseObject; however, what is contained is ultimately determined by what is necessary to make the documentation clear for users.
!syntax description /Constraints/TiedValueConstraint
Input Parameters
- tangential_toleranceTangential distance to extend edges of contact surfaces
C++ Type:double
Description:Tangential distance to extend edges of contact surfaces
- normal_smoothing_distanceDistance from edge in parametric coordinates over which to smooth contact normal
C++ Type:double
Description:Distance from edge in parametric coordinates over which to smooth contact normal
- scaling1scaling factor to be applied to constraint equations
Default:1
C++ Type:double
Description:scaling factor to be applied to constraint equations
- normal_smoothing_methodMethod to use to smooth normals (edge_based|nodal_normal_based)
C++ Type:std::string
Description:Method to use to smooth normals (edge_based|nodal_normal_based)
- execute_onLINEARThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM.
Default:LINEAR
C++ Type:ExecFlagEnum
Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM.
- orderFIRSTThe finite element order used for projections
Default:FIRST
C++ Type:MooseEnum
Description:The finite element order used for projections
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Description:Set the enabled status of the MooseObject.
- use_displaced_meshTrueWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:True
C++ Type:bool
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.