- output_nonlinearFalseSpecifies whether output occurs on each nonlinear residual evaluation
Default:False
C++ Type:bool
Description:Specifies whether output occurs on each nonlinear residual evaluation
- append_date_formatThe format of the date/time to append, if not given UTC format used (see http://www.cplusplus.com/reference/ctime/strftime).
C++ Type:std::string
Description:The format of the date/time to append, if not given UTC format used (see http://www.cplusplus.com/reference/ctime/strftime).
- file_baseThe desired solution output name without an extension
C++ Type:std::string
Description:The desired solution output name without an extension
- end_stepTime step at which this output object stop operating
C++ Type:int
Description:Time step at which this output object stop operating
- output_linearFalseSpecifies whether output occurs on each linear residual evaluation
Default:False
C++ Type:bool
Description:Specifies whether output occurs on each linear residual evaluation
- append_dateFalseWhen true the date and time are appended to the output filename.
Default:False
C++ Type:bool
Description:When true the date and time are appended to the output filename.
- use_displacedFalseEnable/disable the use of the displaced mesh for outputting
Default:False
C++ Type:bool
Description:Enable/disable the use of the displaced mesh for outputting
- additional_execute_onThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, FAILED, CUSTOM.
C++ Type:ExecFlagEnum
Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, FAILED, CUSTOM.
- execute_onINITIAL TIMESTEP_ENDThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, FAILED, CUSTOM.
Default:INITIAL TIMESTEP_END
C++ Type:ExecFlagEnum
Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, FAILED, CUSTOM.
- start_stepTime step at which this output object begins to operate
C++ Type:int
Description:Time step at which this output object begins to operate
VTK
The VTK has not been documented, if you would like to contribute to MOOSE by writing documentation, please see Documenting MOOSE. The content contained on this page explains the typical documentation associated with a MooseObject; however, what is contained is ultimately determined by what is necessary to make the documentation clear for users.
!syntax description /Outputs/VTK
Input Parameters
- padding3The number of for extension suffix (e.g., out.e-s002)
Default:3
C++ Type:unsigned int
Description:The number of for extension suffix (e.g., out.e-s002)
- binaryFalseSet VTK files to output in binary format
Default:False
C++ Type:bool
Description:Set VTK files to output in binary format
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Description:Set the enabled status of the MooseObject.
- output_if_base_containsIf this is supplied then output will only be done in the case that the output base contains one of these strings. This is helpful in outputting only a subset of outputs when using MultiApps.
C++ Type:std::vector
Description:If this is supplied then output will only be done in the case that the output base contains one of these strings. This is helpful in outputting only a subset of outputs when using MultiApps.
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector
Description:Adds user-defined labels for accessing object parameters via control logic.
Advanced Parameters
- time_tolerance1e-14Time tolerance utilized checking start and end times
Default:1e-14
C++ Type:double
Description:Time tolerance utilized checking start and end times
- start_timeTime at which this output object begins to operate
C++ Type:double
Description:Time at which this output object begins to operate
- interval1The interval at which time steps are output to the solution file
Default:1
C++ Type:unsigned int
Description:The interval at which time steps are output to the solution file
- sync_timesTimes at which the output and solution is forced to occur
C++ Type:std::vector
Description:Times at which the output and solution is forced to occur
- end_timeTime at which this output object stop operating
C++ Type:double
Description:Time at which this output object stop operating
- sync_onlyFalseOnly export results at sync times
Default:False
C++ Type:bool
Description:Only export results at sync times
Timing Parameters
- positionSet a positional offset, this vector will get added to the nodal coordinates to move the domain.
C++ Type:libMesh::Point
Description:Set a positional offset, this vector will get added to the nodal coordinates to move the domain.
- fileThe name of the mesh file to read, for oversampling
C++ Type:MeshFileName
Description:The name of the mesh file to read, for oversampling
- refinements0Number of uniform refinements for oversampling (refinement levels beyond any uniform refinements)
Default:0
C++ Type:unsigned int
Description:Number of uniform refinements for oversampling (refinement levels beyond any uniform refinements)
Oversampling Parameters
- hideA list of the variables and postprocessors that should NOT be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
C++ Type:std::vector
Description:A list of the variables and postprocessors that should NOT be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
- showA list of the variables and postprocessors that should be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
C++ Type:std::vector
Description:A list of the variables and postprocessors that should be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
Variables Parameters
- linear_residual_start_timeSpecifies a start time to begin output on each linear residual evaluation
C++ Type:double
Description:Specifies a start time to begin output on each linear residual evaluation
- nonlinear_residual_start_timeSpecifies a start time to begin output on each nonlinear residual evaluation
C++ Type:double
Description:Specifies a start time to begin output on each nonlinear residual evaluation
- linear_residual_dt_divisor1000Number of divisions applied to time step when outputting linear residuals
Default:1000
C++ Type:double
Description:Number of divisions applied to time step when outputting linear residuals
- nonlinear_residual_dt_divisor1000Number of divisions applied to time step when outputting non-linear residuals
Default:1000
C++ Type:double
Description:Number of divisions applied to time step when outputting non-linear residuals
- linear_residual_end_timeSpecifies an end time to begin output on each linear residual evaluation
C++ Type:double
Description:Specifies an end time to begin output on each linear residual evaluation
- nonlinear_residual_end_timeSpecifies an end time to begin output on each nonlinear residual evaluation
C++ Type:double
Description:Specifies an end time to begin output on each nonlinear residual evaluation