Postprocessors System
- NumbatEffectivePermeabilityCalculates effective permeability of equivalent homogeneous model
- NumbatRayleighNumberCalculates Rayleigh number
- NumbatSideFluxCalculates the mass flux over the boundary
- NumbatSideFluxSFCalculates the dimensionless mass flux over the boundary for the streamfunction formulation
- NumbatTotalMassCalculates the total mass in model
- NumbatTotalMassSFCalculates the total dimensionless mass in model for the streamfunction formulation
- AreaPostprocessorComputes the "area" or dimension - 1 "volume" of a given boundary or boundaries in your mesh.
- AverageElementSize
- AverageNodalVariableValue
- AxisymmetricCenterlineAverageValueComputes the average value of a variable on a sideset located along the centerline of an axisymmetric model.
- ChangeOverTimePostprocessorComputes the change or relative change in a post-processor value over a timestep or the entire transient
- ChangeOverTimestepPostprocessorComputes the change or relative change in a post-processor value over a timestep or the entire transient
- CumulativeValuePostprocessor
- DifferencePostprocessor
- ElementAverageTimeDerivative
- ElementAverageValue
- ElementExtremeValue
- ElementH1Error
- ElementH1SemiError
- ElementIntegralMaterialProperty
- ElementIntegralVariablePostprocessor
- ElementL2Difference
- ElementL2Error
- ElementL2Norm
- ElementVectorL2Error
- ElementW1pError
- ElementalVariableValueOutputs an elemental variable value at a particular location
- EmptyPostprocessor
- ExecutionerAttributeReporter
- FindValueOnLineFind a specific target value along a sampling line. The variable values along the line should change monotonically. The target value is searched using a bisection algorithm.
- FunctionSideIntegral
- FunctionValuePostprocessor
- LinearCombinationPostprocessor
- MemoryUsageMemory usage statistics for the running simulation.
- NodalExtremeValue
- NodalL2Error
- NodalL2Norm
- NodalMaxValue
- NodalProxyMaxValue
- NodalSum
- NodalVariableValueOutputs values of a nodal variable at a particular location
- NumDOFsReturn the number of Degrees of freedom from either the NL, Aux or both systems.
- NumElemsReturn the number of active or total elements in the simulation.
- NumLinearIterations
- NumNodesReturns the total number of nodes in a simulation (works with DistributedMesh)
- NumNonlinearIterationsOutputs the number of nonlinear iterations
- NumPicardIterations
- NumResidualEvaluations
- NumVarsReturn the number of variables from either the NL, Aux, or both systems.
- PercentChangePostprocessor
- PerfGraphDataRetrieves timing information from the PerfGraph.
- PerformanceDataProvides programmatic access to Performance Log Data
- PointValue
- Receiver
- RelativeDifferencePostprocessorComputes the absolute value of the relative difference between 2 post-processor values.
- RelativeSolutionDifferenceNorm
- Residual
- ScalarL2Error
- ScalarVariable
- ScalePostprocessor
- SideAverageValueComputes the average value of a variable on a sideset. Note that this cannot be used on the centerline of an axisymmetric model.
- SideFluxAverageComputes the integral of the flux over the specified boundary
- SideFluxIntegralComputes the integral of the flux over the specified boundary
- SideIntegralVariablePostprocessor
- TimeExtremeValueA postprocessor for reporting the extreme value of another postprocessor over time.
- TimestepSizeReports the timestep size
- TotalVariableValue
- VariableInnerProduct
- VariableResidual
- VectorPostprocessorComparisonCompares two vector post-processors of equal size and produces a boolean value
- VolumePostprocessor